What factors can cause intermittent splitter performance degradation?
Intermittent splitter will suffer from performance degradation during use,so what are the reasons for the impairment?as follows
1.Transmission element gears,pulleys,chain shackles,keys,keyways,etc.,gap sliding or loose screws,insufficient structural rigidity,etc.
2.The rotation of the input drive system is unstable.The tension of the belt and chain is too large,the tension is insufficient,the concentricity of the power transmission wheel,and the flatness is poor.
3,the power station positioning system of the disk surface bending,deformation,concentricity,poor leveling,work fixture positioning correction is not good.
4.The friction torque of the output transmission system is unstable,such as the transmission is idling,sliding,and the locking part is loose.
5.The inertial vibration of the intermittent splitter is large,the load of the impact is changed,the distance between the plates of the station is too large,and the fixture is overweight,overloaded,and overloaded.
6,water,acid,alkali,dusty environment is easy to rust environment,not doing isolation protection and regular cleanliness and other management improper.